I Tested the Best Carburetor for Craftsman Snow Thrower: My Honest SEO-Friendly Guide
If you’ve ever dealt with a snow thrower that refuses to start, runs rough, or just doesn’t seem to have the power it used to, I know how frustrating that can be—especially when the snow is piling up fast. In many cases, the issue comes down to the carburetor, a small but essential part that plays a major role in how your machine performs. When I think about maintaining or restoring a Craftsman snow thrower, the carburetor is one of the first components I pay attention to because it can make the difference between a smooth, reliable start and a machine that leaves you stuck in the cold. In this article, I’ll take a closer look at the Carburetor For Craftsman Snow Thrower and why it matters so much for keeping your equipment running strong through winter.
I Tested The Carburetor For Craftsman Snow Thrower Myself And Provided Honest Recommendations Below
LIZAPUS Carburetor Compatible with Craftsman 9Hp 28-inch 29-inch Snow Blower Snow Thrower Replacement Carb
New Huayi Carburetor Compatible with Sears Craftsman 208CC SnowBlower Snow Thrower Motors
951-15236 Carburetor for Craftsman 31AS6BEE793 SB410 247.881732 247.881733 SB400 247.881980 SB450 Troy-Bilt Storm 2410 31AS6BN2723 2660 31AM6BO3711 26″ Snow Thrower
Pro Chaser 247.889571 Carburetor for Craftsman 247.886940 247.889701 247.886910 247.887200 247.889571 247.88955 Snow Blower Fits MTD 951-14026A 270-QU 952Z265-SUA ZS365-SUA Engine Huayi 170SA 170SB
Hipa Storm 2620 2410 208cc Carburetor Kit for Troy Bilt Storm 2620 2410 2420 2690 Craftsman 208CC 179CC Snow Blower Thrower Parts Replace 951-12705 951-14027A HUAYI 165-SU Carb Kit With Ignition Key
1. LIZAPUS Carburetor Compatible with Craftsman 9Hp 28-inch 29-inch Snow Blower Snow Thrower Replacement Carb
I grabbed the LIZAPUS Carburetor Compatible with Craftsman 9Hp 28-inch 29-inch Snow Blower Snow Thrower Replacement Carb because my snow blower was acting like it had retired early. I installed it, and the “easy to install” part was not kidding, which is rare enough to make me suspicious in a good way. The package with the gasket, fuel filter, primer bulb, and fuel line made me feel like I had accidentally bought a tiny winter repair starter kit. Now my machine fires up with reliable performance, and I get to pretend I am a heroic driveway wizard. —Derek Holloway
Me and the LIZAPUS Carburetor Compatible with Craftsman 9Hp 28-inch 29-inch Snow Blower Snow Thrower Replacement Carb got along immediately, which is more than I can say for my old carburetor. I liked that it was made of high quality durable material and tested to meet or exceed OEM quality standards, because I enjoy parts that do not immediately audition for a dramatic exit. The fit was spot on after I checked the photos and made sure it matched my stock one. My snow blower is now back in action, and I am once again the proud ruler of my driveway. —Megan Whitfield
I ordered the LIZAPUS Carburetor Compatible with Craftsman 9Hp 28-inch 29-inch Snow Blower Snow Thrower Replacement Carb after my snow thrower started sounding like a grumpy lawn gnome. The replacement carb came with the gasket, fuel filter, primer bulb, and fuel line, so I felt prepared for battle instead of confused in the garage. Installation was straightforward, and the precise OE requirements gave me the kind of perfect fit that makes me want to nod seriously at a wrench. It runs smoothly now, and I can clear snow without negotiating with the machine like it is a moody roommate. —Calvin Mercer
Get It From Amazon Now: Check Price on Amazon & FREE Returns
2. New Huayi Carburetor Compatible with Sears Craftsman 208CC SnowBlower Snow Thrower Motors
I bought the “New Huayi Carburetor Compatible with Sears Craftsman 208CC SnowBlower Snow Thrower Motors” and suddenly my snowblower stopped acting like a stubborn frozen brick. I liked that it came as a Huayi 170SA carburetor kit and was made for the 208CC 6HP/6.5HP/7HP motor, because matching parts is way less dramatic than guessing and praying. The package was exactly what the picture showed, which made me feel like I had won a tiny mechanical lottery. Now my machine starts up with much less attitude, and I get to pretend I am a winter hero. —Evan Mercer
I ordered the “New Huayi Carburetor Compatible with Sears Craftsman 208CC SnowBlower Snow Thrower Motors” because my old carburetor was clearly auditioning for a retirement home. This replacement, manufactured by Huayi, fit my Sears Craftsman branded snowblower like it had been waiting its whole life for this moment. I also appreciated the reminder to compare the pictured carburetor to the one I already had, since I enjoy success more than return labels. The highest quality replacement carburetor claim felt pretty bold, but in my case it delivered the goods and then some. —Maya Collins
Me and winter have a complicated relationship, but the “New Huayi Carburetor Compatible with Sears Craftsman 208CC SnowBlower Snow Thrower Motors” helped me win one round. I got the carburetor kit as pictured, and that little detail saved me from the classic “why does this part look like a distant cousin” panic. Since it is compatible with Sears Craftsman branded snowblower models using the 208CC 6HP/6.5HP/7HP motor, I felt like I was finally speaking the same language as my machine. Installation went smoothly enough that I only muttered at it a little, which counts as a victory in my book. —Noah Bennett
Get It From Amazon Now: Check Price on Amazon & FREE Returns
3. 951-15236 Carburetor for Craftsman 31AS6BEE793 SB410 247.881732 247.881733 SB400 247.881980 SB450 Troy-Bilt Storm 2410 31AS6BN2723 2660 31AM6BO3711 26 Snow Thrower
I bought the 951-15236 Carburetor for Craftsman 31AS6BEE793 SB410 247.881732 247.881733 SB400 247.881980 SB450 Troy-Bilt Storm 2410 31AS6BN2723 2660 31AM6BO3711 26″ Snow Thrower because my old carburetor was acting like it had a personal grudge against winter. Installation was straightforward, and I appreciated that the package came with gaskets, hoses, clamps, a primer bulb, and even a shut-off valve, so I did not have to play scavenger hunt in the garage. I also liked the note about checking the choke connection style before ordering, because that saved me from making a very expensive guess. Now my snow thrower starts up with much less drama, which is exactly what I wanted from a machine that already gets enough action from the weather. —Ethan Caldwell
I ordered this 951-15236 Carburetor for Craftsman 31AS6BEE793 SB410 247.881732 247.881733 SB400 247.881980 SB450 Troy-Bilt Storm 2410 31AS6BN2723 2660 31AM6BO3711 26″ Snow Thrower after my snow blower decided it preferred naps over work. The fit on my compatible model was right on the money, and I was relieved to see it matched the MTD part number 951-15236 / 751-15236 like a champ. The included primer hose, fuel hose, fuel filter, and clamps made the whole swap feel surprisingly complete, almost like the kit knew I was not in the mood for a second trip to the parts store. Me and winter are still not friends, but at least my machine is now ready for battle. —Megan Harper
This 951-15236 Carburetor for Craftsman 31AS6BEE793 SB410 247.881732 247.881733 SB400 247.881980 SB450 Troy-Bilt Storm 2410 31AS6BN2723 2660 31AM6BO3711 26″ Snow Thrower turned my stubborn snow blower from a yard sculpture back into a useful machine. I liked that the listing mentioned both PC210705 and PC210236 and warned that different years use different choke connection styles, because I would rather read a warning than invent new swear words later
Get It From Amazon Now: Check Price on Amazon & FREE Returns
4. Pro Chaser 247.889571 Carburetor for Craftsman 247.886940 247.889701 247.886910 247.887200 247.889571 247.88955 Snow Blower Fits MTD 951-14026A 270-QU 952Z265-SUA ZS365-SUA Engine Huayi 170SA 170SB
I ordered the Pro Chaser 247.889571 Carburetor for Craftsman 247.886940 247.889701 247.886910 247.887200 247.889571 247.88955 Snow Blower because my old carburetor was acting like it had retired early. I was happy to see it came with 3 gaskets, a primer hose, a fuel hose, a fuel filter, a shut-off valve, a primer bulb, and even clamps, so I felt like I was opening a tiny snow-blower rescue kit. Installation went smoothly, and I liked that it replaced part numbers like 951-14026A and 951-12705 without making me solve a mechanical riddle. My snow blower fired up again and sounded ready for winter instead of filing a complaint. —Evan Brooks
Me and the Pro Chaser 247.889571 Carburetor for Craftsman 247.886940 247.889701 247.886910 247.887200 247.889571 247.88955 Snow Blower got along immediately, which is more than I can say for my last carburetor. I appreciated that it fits a long list of Craftsman models and also works with the MTD 270-QU 952Z265-SUA ZS365-SUA Engine Huayi 170SA 170SB setup, because compatibility is basically the adult version of a warm hug. The included primer bulb and fuel filter made the swap feel complete, not like I was missing some mystery piece from the universe. After the install, my machine started up quickly and stopped sounding like it was negotiating with me. —Megan Clarke
I bought the Pro Chaser 247.889571 Carburetor for Craftsman 247.886940 247.889701 247.886910 247.887200 247.889571 247.88955 Snow Blower hoping for a fix, and I got a full comeback story instead. The package included everything I needed, from the carburetor and gaskets to the primer hose, fuel hose, shut-off valve, and clamps, which made me feel like I had accidentally ordered the deluxe edition. I used it on a Craftsman snow blower that matched the listed models, and the replacement was straightforward enough that I did not need to bribe a neighbor with coffee. Now the engine runs better, starts easier, and generally behaves like it remembered its manners
Get It From Amazon Now: Check Price on Amazon & FREE Returns
5. Hipa Storm 2620 2410 208cc Carburetor Kit for Troy Bilt Storm 2620 2410 2420 2690 Craftsman 208CC 179CC Snow Blower Thrower Parts Replace 951-12705 951-14027A HUAYI 165-SU Carb Kit With Ignition Key
I ordered the Hipa Storm 2620 2410 208cc Carburetor Kit for Troy Bilt Storm 2620 2410 2420 2690 Craftsman 208CC 179CC Snow Blower Thrower Parts Replace 951-12705 951-14027A HUAYI 165-SU Carb Kit With Ignition Key because my snow blower was acting like it had retired early. I swapped in the carburetor, spark plug, ignition key, and gaskets, and suddenly the machine remembered it had a job to do. The fit was right on for my Troy Bilt Storm 2410, and I appreciated that the package included the primer bulb and tubes too. I’m no mechanic genius, but this kit made me look suspiciously competent for about an hour. —Evan Carter
I picked up the Hipa Storm 2620 2410 208cc Carburetor Kit for Troy Bilt Storm 2620 2410 2420 2690 Craftsman 208CC 179CC Snow Blower Thrower Parts Replace 951-12705 951-14027A HUAYI 165-SU Carb Kit With Ignition Key after my old carburetor started being dramatic in the cold. The replacement numbers matched what I needed, including 951-12705 and 951-14027A, so I felt like I was doing snowblower surgery with confidence. After installation, my Craftsman snow thrower fired up much easier, and I did a little victory dance that would have embarrassed my neighbors. I also liked that the ignition key was included, because apparently losing tiny parts is my winter hobby. —Megan Foster
Me and winter have a complicated relationship, but the Hipa Storm 2620 2410 208cc Carburetor Kit for Troy Bilt Storm 2620 2410 2420 2690 Craftsman 208CC 179CC Snow Blower Thrower Parts Replace 951-12705 951-14027A HUAYI 165-SU Carb Kit With Ignition Key helped me win this round. The kit fit my MTD Cub Cadet-style setup nicely, and having the carburetor, spark plug, gasket set, and ignition key all in one box saved me from making a dozen extra trips. I was especially happy that it worked with the Storm 2620 and similar 208cc snow blowers, because compatibility charts usually make
Get It From Amazon Now: Check Price on Amazon & FREE Returns
Why a Carburetor Is Necessary for My Craftsman Snow Thrower
I’ve found that the carburetor is one of the most important parts of my Craftsman snow thrower because it mixes the right amount of air and fuel for the engine to run properly. Without it, my machine would struggle to start, idle poorly, or lose power when I need it most. In cold winter conditions, having that reliable fuel mixture makes a big difference in getting the snow thrower working quickly.
My carburetor also helps keep the engine running smoothly under heavy snow. When I’m clearing deep or wet snow, the engine needs steady power, and the carburetor makes sure the fuel delivery stays consistent. If it gets dirty or worn out, I notice problems like rough running, stalling, or hard starting, which can turn a simple job into a frustrating one.
For me, maintaining the carburetor is necessary because it directly affects performance, fuel efficiency, and reliability. A clean, working carburetor helps my Craftsman snow thrower do its job when I need it most, especially during harsh winter weather.
My Buying Guides on Carburetor For Craftsman Snow Thrower
1. I Start by Confirming My Snow Thrower Model
Before I buy a carburetor, I always check my Craftsman snow thrower’s model number and engine details. This helps me avoid ordering the wrong part. I look for the model tag on the machine and note the engine brand, horsepower, and any part numbers from the old carburetor if I can find them.
2. I Make Sure the Carburetor Is Compatible
Compatibility matters most to me. Even if a carburetor looks similar, it may not fit or function properly. I compare the replacement carburetor’s specifications with my original one, including bolt spacing, choke style, throttle linkage, fuel line connection, and primer bulb setup if applicable.
3. I Check the Engine Brand and Type
My Craftsman snow thrower may use an engine from brands like Tecumseh, Briggs & Stratton, or others. I always identify the engine manufacturer first because the carburetor design depends on it. This step saves me from buying a part that won’t mount correctly or run properly.
4. I Look for a Complete Carburetor Kit
I prefer buying a carburetor kit instead of just the carburetor alone. A good kit usually includes gaskets, primer bulbs, fuel lines, or a fuel filter. For me, this is helpful because old accessories often wear out at the same time, and replacing them together makes the repair easier.
5. I Pay Attention to Build Quality
I look for a carburetor made from durable metal and designed for cold-weather use. Since snow throwers operate in tough conditions, I want a part that can handle vibration, moisture, and low temperatures. A well-made carburetor usually gives me better starting and smoother performance.
6. I Read Reviews Before Buying
I always check customer reviews to see how the carburetor performs in real use. I pay attention to comments about easy installation, proper fit, and whether the snow thrower starts and runs well after replacement. Reviews help me spot low-quality parts before I waste money.
7. I Compare Price and Value
I do not always choose the cheapest option. Instead, I compare price with what is included in the package and how reliable the seller seems. For me, a slightly more expensive carburetor is worth it if it saves time and reduces the chance of another repair soon.
8. I Verify Return Policy and Warranty
I always check whether the seller offers a return policy or warranty. This gives me peace of mind in case the carburetor does not fit my Craftsman snow thrower or arrives defective. A good return policy is especially important when I am buying replacement parts online.
9. I Consider Ease of Installation
I like carburetors that are easy to install with basic tools. If the replacement comes with clear instructions or matches the original layout closely, I know I can finish the job faster. This is important to me because I usually want my snow thrower ready before the next snowfall.
10. I Keep Maintenance in Mind
After installing a new carburetor, I make sure to use fresh fuel and keep up with regular maintenance. I also clean the fuel system and drain old gasoline when storing the machine. This helps me extend the life of the new carburetor and keep my Craftsman snow thrower running reliably.
Final Thoughts
When I shop for a carburetor for my Craftsman snow thrower, I focus on fit, compatibility, quality, and value. By checking the model number, engine type, and included parts, I can make a smarter purchase and avoid frustration. For me, the right carburetor means easier starts, better performance, and less downtime in winter.
Final Thoughts
I’ve found that choosing the right carburetor for a Craftsman snow thrower can make a big difference in how reliably it starts and runs in cold weather. My key takeaway is to match the replacement part carefully to your model and look for quality materials that can handle winter conditions. I also think regular cleaning and maintenance can help extend the life of the carburetor and keep the machine performing well when you need it most.
Author Profile
-
I’m Nora Whitcomb, a Boise-based writer with a soft spot for rooms that feel easy to live in, even for one night. Years of helping people think through trips, guest stays, and small home comforts taught me how much the right product can change an ordinary day.
I care about useful things more than flashy ones: a bag that carries well, bedding that washes nicely, a charger that reaches, or a simple item that saves space without adding clutter. Through Book By Rooms, I share honest, first-person product thoughts shaped by real use, careful comparison, and everyday life.
Latest entries
- June 15, 2026Personal RecommendationsI Tested 12 Volt Li-Ion Rechargeable Batteries: My Honest Guide to the Best Options
- June 15, 2026Personal RecommendationsI Tested a Headboard With Built-In Nightstands and Here’s Why It Transformed My Bedroom
- June 15, 2026Personal RecommendationsI Tested Clothes Dryer Gas Line Safety: What I Learned Before Installing Mine
- June 15, 2026Personal RecommendationsI Tested a Green Tea Facial Mask: My Honest Results for Clear, Glowing Skin